Tuckpointing & Repointing
Cracked, crumbling mortar ground out and replaced with a colour-matched mix that keeps water out of your walls.
Tuckpointing & Repointing →Crowns, caps and flashing, leaning or spalling chimneys, and full rebuilds from the roofline up.
A chimney takes more weather than any other part of the house. It stands above the roof, is hit by wind and rain from every side, and goes through hundreds of freeze-thaw cycles every winter. That is why chimneys are usually the first masonry on a home to fail.
We repair chimneys at every stage, from a cracked crown or a few loose bricks to a chimney that is leaning and needs to be taken down and rebuilt from the roofline.
A new properly sloped crown with an overhang so water drips clear of the brick instead of running down it.
Failing joints rebuilt and damaged bricks swapped for good matches.
When a chimney is leaning or badly deteriorated, we take it down to sound brick and rebuild it, usually from the roofline up.
Chimney caps keep rain and animals out. Where flashing is part of the leak, we flag it and can coordinate the repair.
Every job is quoted after a site visit. These are the main things that move the number:
It can be. A leaning chimney can lose bricks or fall, especially in high wind. If yours looks like it is leaning, have it looked at soon and keep people away from below it.
Repairs usually do not need one. Larger rebuilds may, depending on the scope and your municipality. We will tell you during the estimate.
Urgent repairs often can. Mortar needs temperatures above freezing to cure, so larger rebuilds are best scheduled from spring to late fall.
Cracked, crumbling mortar ground out and replaced with a colour-matched mix that keeps water out of your walls.
Tuckpointing & Repointing →Spalled or cracked bricks replaced, step cracks repaired, and damaged sections rebuilt to match the original.
Brick Repair & Replacement →Stone facades, accent walls, sills and caps, installed new or repaired.
Stone Veneer & Natural Stone →Small masonry problems get expensive fast. Get a free, no-pressure estimate.